3D Printed RC Car Jeep M715
3d printed model of 1967 Kaiser Jeep M715!
A special feature of the model is that it uses metal gears and drive shafts inside the transmission and axles! You will no longer have problems with the breakage of 3D printed components. And you will not need to look for a way to make a conversion to install metal components! Everything is already included in the basic version!
You need 2.5 - 2.6 kg filament to print all the details for this model. The archive contains a folder with individual parts, and also a folder with parts combined into small groups, which can simplify the preparation of parts for printing for you. It usually takes 8 to 12 hours to print one group. All groups are numbered in the order recommended for printing. You can start assembling the model while printing the parts! The minimum required print area is 200x200x200mm.
Assembly instructions available here.
- Scale 1 / 8.5
- Length ~628mm
- Width ~ 232/246mm(without/with mirrors)
- Height ~ 267mm
- Wheelbase ~ 377mm
- Track ~ 198mm
- Ground clearance ~ 70mm
Pay attention! If you are printing parts from a folder with individual parts, then it does not contain some parts for the right side. Therefore, if you cannot find some part for the right side, then just make a mirror copy, the part for the left side, in your slicer!
If you have questions regarding this model, you can ask them using one of the methods on the Contacts page.