3D Printed RC Tracked Skid Steer Loader in 1/8.5 scale
3D printed radio-controlled model of a Tracked Skid-Steer Loader (other names are Compact Track Loader, Skid Steer Loader, Bobcat Loader).
To print this model, you need about 2.4kg of filament of different colors and types. Most parts can be printed with any type of filament, such as PLA, ABS, PETG, but tracks must be printed with flexible filament! Therefore, your printer must be able to print with flexible filaments! More information about filament types can be found in the printable parts list: Here
All the necessary information for building the model, such as a list of non-printed parts for purchase, a list of fasteners, some characteristics and features of the model, you can find in the assembly instructions for this model: Here
In the archive with the model, you can find individual parts as well as parts combined into small groups, which will help you simplify the process of preparing parts for printing. Some print groups are too big for 180x180mm printers, so if you have a printer like that, you need to print these parts from individual parts folder! Some individual parts are too large for 180x180mm printers, so you will need to print these parts from the Alternative Parts folder.
The archive also contains some alternative versions of parts for printers with 300x300mm print area. Some parts are combined, which will simplify the process of assembling the model!
All parts for the model are designed to be printed with minimal using or no support material. Check out the printable parts list at the link above!
See more photos of the model in the slide show!
Video presentation of the model is available here: https://youtu.be/4tpYhxi-rEQ
The main characteristics of the model:
- RC model, 1 : 8.5 scale
- Realistic exterior look and Detailed interior
- Openable tailgate
- Functional lift arm and bucket
- Electric linear actuators used
- Belt drive
- Tracks from flex filament
- 80 printing parts
- 21 printing groups
- 2.4 kg filament
- Can be printed with 180x180mm printers
- Length with bucket - 406mm
- Width - 221mm
- Height - 237mm
For more sizing information, see the assembly instructions at the link above!