3D PRINTED RC CAR HUMMER H1 SLANTBACK BODY


I present to your attention the best 3D printed Hummer H1 in the world !!!

Attention only the slantback body is published here! In order to assemble the complete model (as in the photo), you also need to download the Chassis and Gearbox

Attention! This body cannot be installed on the TRX-4 / SCX10 chassis! It has its own chassis! You can see a comparison of the dimensions of the TRX-4 chassis and the Hummer body in the last image!

You can download the chassis from this: Link

Gearbox: Link

Wagon body: Link

4 door Pickup body: Link

2 door Pickup body: Link

Humvee 2 in 1 body set: Link

Instructions with all the necessary information, a list of parts to buy and a list of used screws and nuts are published at the link: Link

Instructions with printing recommendations can be found at this link: Link

The assembled model has the following technical characteristics:
- This model is designed on a scale of 1 / 8.5.
- Length approximately 550mm.
- Width approximately 260mm (without mirrors)
- Wheelbase - 388mm.
- Track - 220mm.
- 4x4
- All mechanisms are working! Doors, hood can all be opened and closed.

All details can be printed on a printer with a 200x200x200mm print area. I printed everything on my Ender 3 Pro.

You can see more photos and videos on my Instagram: https://www.instagram.com/ant.nesh/

I created a Facebook group, if you have any questions you can ask them there https://www.facebook.com/groups/an3drc

Test ride video: https://www.youtube.com/watch?v=z_DQVSOeh70

Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer!

Upd 31 Jan 2021---------------------------------------------
Big update v1.1 for chassis and bodies!
Whats new come with this update you can see in this presentation Link

Upd 12 Apr 2021 ----------------------------------------------
Update v1.15
-The hood has been changed: it is divided from two to three parts this will save filament on the construction of supports when printing.
- Front base quarters changed. The Hood locker attachment point is now a separate part. If this area is damaged, you will not need to print the entire base quarter.
-Added built-in support for the roof. This will reduce / remove swaying of the part when printing.
-Small bugs fixed

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Related Products