10MM SUSPENSION LIFT KIT FOR 3D PRINTED HUMMER / HUMVEE
This is a set to increase the ground clearance of 3D printed Hummer and Humvee by 10mm. Also, this set allows you to install wheels with an outer diameter of 115-120mm. Standard ground clearance is 43-46mm, but with this kit and 120mm wheels it will increase to 64mm!
To install this kit, you need to replace the standard suspension parts with modified parts from this kit. The modified parts are shown in images 3-5 and are colored blue.
This kit is recommended for use with metal transmissions and differentials. I find that oversized wheels put a lot of stress on the differential and the strength of standard 3D printed parts will not be enough. Details and instructions for installing metal transmission: link
But you can also send me a request to create the necessary parts for using this set with a 3D printed transmission and differential (Request free)
Now the archive contains only modified parts of the standard suspension (with vertical shock absorbers 98mm and 68mm long), but if you use a pushrod suspension in the 2-door Pickup version, then send me a request and I will make the necessary parts for you https://www.facebook.com/groups/an3drc