This is a fully printed model (excluding some details).

Here you can download only the chassis. It is universal for all bodies. You also need to download a gearbox and one of the bodies.

This model is designed on a scale of 1 / 8.5.
Length approximately 550mm.
Width approximately 260mm (without mirrors)
Wheelbase - 388mm.
Track - 220mm.

Initially, the Chassis was created for printing on printers with a 200x200x200mm print area.I printed everything on my Ender 3 Pro. But many parts are smaller and can be printed on printers with a print area of 180x180x180mm. For those parts that initially did not fit on such small printers, alternative versions were created and now you can print this chassis on your printer with a print area of 180x180x180, for example, on the Prusa mini!

You can find all the necessary instructions for assembly at this link: https://docs.google.com/presentation/d/1B8VXsWch5IbQto0n8vRz7QcawhbL87K7CtNM5CQUMzg

Instructions with printing recommendations can be found at this link: https://docs.google.com/presentation/d/1vPexlNR0m7-I8J80tygvKohtnOg50FONwSv7r14FMBk

You can download the Gearbox from this: Link

Wagon body: Link

Slantback body: Link

4 door Pickup body: Link

2 door Pickup body: Link

Humvee 2 in 1 body set: Link

You can see more photos on my Instagram: https://www.instagram.com/ant.nesh/

I have a Facebook group, if you have any questions you can ask them there https://www.facebook.com/groups/1611384019035352

Test drive of a fully assembled model: https://www.youtube.com/watch?v=z_DQVSOeh70

Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer!

Upd 18 Oct 2020-------------------------------------------
Fixed spacer ring in the wheel rim for more secure rubber fixation. Additional mounting holes have been added to the center and rear of the frame parts for future updates. But if you have already printed these details, then it's okay. The holes can be made with a drill.

Upd 20 Oct 2020-------------------------------------------
Added a set of rear pushrod suspension. Recommended for use with a 2-door pickup body. Long (98mm) and soft shock absorbers cannot be used with this body type. This suspension is lighter than the short (68mm) shocks in the standard configuration.

Upd 7 Dec 2020-----------------------------------------------
Added grease holes to differential cases as recommended by one customer. This will make it easier to service the differentials. You can add grease with a syringe without disassembling the differential. The holes are not through, if you want to use them you need to drill them all the way with a 2.5mm drill bit. To prevent the grease from leaking out, the holes must be closed with the M3x3-5 screw.

Upd 31 Jan 2021---------------------------------------------
Big update for chassis and bodies!
Whats new come with this update you can see in this presentation https://docs.google.com/presentation/d/1TxHhYKVKwII4jKq7qA5wcRCS4tXbHYeXIsXKtNv49V0

Upd 11 Apr 2021----------------------------------------------
Added alternative versions of some parts so that the Chassis could be printed on a printer with a 180x180mm printing bed.

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products