3D Printed RC Multidirectional dumper in 1/8.5 scale

3D printed radio-controlled model of a  Multidirectional dumper in 1/8.5 scale

The model turns by folding the chassis. The bucket can lift up and turn left and right by 90 degrees. The cab and engine compartment doors can be opened. The cabin can be lifted up for easy access to the battery and electronics. The model uses metal gears and drive shafts for greater durability.

To print this model, you need about 2.5kg of filament of different colors. More information about filament colors can be found in the printable parts list here 

All the necessary information for building the model, such as a list of non-printed parts for purchase, a list of fasteners, some characteristics and features of the model, you can find in the assembly instructions for this model here

In the archive with the model, you can find individual parts as well as parts combined into small groups, which will help you simplify the process of preparing parts for printing. Some print groups are too big for 180x180mm printers, so if you have a printer like that, you need to print these parts from individual parts folder! Some individual parts are too large for 180x180mm printers, so you will need to print these parts from the Alternative Parts folder.

The archive also contains some alternative versions of parts for printers with 300x300mm print area. Some parts are combined, which will simplify the process of assembling the model!

All parts for the model are designed to be printed with minimal using or no support material. Check out the printable parts list at the link above!

See more photos of the model in the slide show!

The main characteristics of the model:

- RC model, 1 : 8.5 scale 

- Realistic exterior look, Detailed interior

- Openable Doors, engine box doors

- Cab can be lifted up for easy access to battery and electronics

- Bucket can dump load front / left / right

- 182 printing parts, 34 printing groups

- 2.5 kg filament

- Can be printed with 180x180mm printers

- Length ~574mm

- Width ~ 267mm

- Height ~ 232mm

- Wheelbase ~ 290mm

- Track ~ 222mm

For more sizing information, see the assembly instructions at the link above!

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Tags: dumper, rc, rc car, construction, construction vehicle, truck, tractor, dozer, excavator