ROOF RACK V1 FOR 3D PRINTED HUMMER H1 4DR PICKUP OR SLANTBACK


Roof rack v1 for 3D Printed Hummer H1 4 door Pickup or Slantback.

The archive contains only the left main parts. To get the right side you need to make a mirror copy of the left side.

You can also add a spare wheel holder. The spare wheel holder can be placed on 1 or 2 from 4 positions: 2 in front, 2 in back or diagonal. The roof rack can accommodate a wheel with an outer diameter of 105-107mm. If you use larger diameter wheels, they will not fit.

You can also find another version of roof rack for 4 door pickup or slantback:Link

To build you need:
М2х5-8 screw - 6pcs for screwing brackets to main parts
М2х4-5 screw - 6pcs for screwing roof rack to model roof
2x25 metal shaft - 8pcs
М2х5-6 screw - 2pcs for for screwing spare wheel holder
M5x28-30mm bolt with hex head and M5 Nut for fixing spare wheel

I have a Facebook group, if you have any questions you can ask them there https://www.facebook.com/groups/an3drc

Write a review

Note: HTML is not translated!
    Bad           Good